Change picture to:
Move Rear Camera 2 Seconds Forward
This tool can be reached from the Main screen, using
the Synchronization Tool button.
Sychronization of multiple input files can be easily adjusted and previewed using this tool.
Select the input file that you want to adjust from the tool's drop-down list, then adjust its
synchronization with other input files in your project by changing its "Starting Position in
Input File" time index. If you use the buttons or bar to make adjustments, the main preview window
will be automatically updated. If you change the text box, press Enter to update the preview
Click here to see an example (look at the rear
view mirror in the picture above... In this example, it has been moved 2 seconds forward, while
the front camera and data display objects remain the same.)
"Offset Within Project" option - This is an advanced option that allows an input file to
start playback deeper into the project, rather than at the very start of it. Set this to the time
index within the current project where this input file will appear and start playing. By default,
this is set to "00:00:00.00", which causes the input file's playback time to start running at the
very beginning of the project, even if it is not being shown by a Display Object at that time. If
you set this option to a later time in the project, the input will not appear or start playing until
that time, which intentionally impacts synchronization with other input files.
- If you simply want a Display Object to not appear until later in the project, without
affecting input file synchronization, the timeline
functionality can be used to do that.
- If you want to join video or audio clips together sequentially, you should use the
Join function on the Main screen.
- When synchronizing two videos, look for an event that both cameras captured, then adjust one
or the other's timing so that the event occurs in the main preview window at the same moment for
both videos. For motorsports footage, the best reference point is often the activation of brake
lights on a vehicle that both cameras can see at the same time. Other common reference points are
when flags are thrown, or when a vehicle reaches a distinct mark on the track.
- If synchronizing multiple cameras on the same vehicle, another possible reference point is
when the vehicle starts moving from a stop, or comes to a stop. If audio is available from each
camera, you may be able to detect incorrect synchronization by listening to the combined audio.
If a distinct sound happens twice, when the actual event only happened once, try adjusting the
synchronization until the doubled sound overlaps and blends together. This can be made more
apparent by using stereo headphones and configuring audio balance in the video display objects
so that one video's audio goes only to the left speaker and the other to the right.
- For datalogger files, use the indicated position on the track map to get your video
synchronization within a few seconds, then fine-tune it by looking at the G-force plot. Watch for
the G-force to swing from left to right, or vice versa, then match that up with the corresponding
moment in your video footage. If your datalogger captures engine RPM or transmission gear, you can
also verify synchronization by listening to the audio during a gear change, and comparing that to
the timing of the tachometer or the gear indicator. Depending on the datalogger, there may be
a slight delay in the RPM and/or gear data, but it should still be reasonably close.
Copyright © 2013 RaceRender LLC